Search Results

Jantzen Equipment, your Landa pressure washer dealer for 40 years. Portable, Electric-Powered, Diesel-Heated, Hot Water Pressure Washer LANDA HOT Portable, Electric-Powered, Diesel-Heated, Hot Water Pressure Washer The HOT is the most economical choice of Landa’s electric-powered, diesel-heated hot water pressure washers featuring the heat-efficient horizontal coil. It is also the only line among those with a horizontal coil design that has a true steam cleaner, or steamer—the HOT3-30036D. QUALITY: The HOT boasts many of the same quality components of other Landa hot water pressure washers, including a tri-plunger high-pressure Landa pump with 7-year warranty (on most models), Schedule 80 heating coil made of 1/2-inch pipe and easy access to pump and motor. PORTABILITY: All of the HOT models weigh less than 500 lbs. and are evenly balanced on four leak-free, tubed, pneumatic tires for easy maneuvering in any terrain. Waffle grips on the two steering bars add to the HOT’s portability. SAFETY: Certified to the rigid UL-1776 safety standards, the HOT also has many features that make it extremely safe, including motor thermal overload protection, rupture disk attached to the heating coil, thermal pump protector, flow-activated fuel shut-off switch, hose guard for burst protection, and Ground Fault Circuit Interrupter on all models. Up to 3.5 GPM, 2000 PSI Heavy-Duty Motor Sch. 80 Heating Coil True Steam Model Easy to Service Landa High-Pressure Pump, which features three ceramic plungers and a forged brass head with 7-year warranty* powered by heavy-duty Legacy or Baldor Motor. High-efficiency Burner is protected by a cover and mounted on the end for easy access. Quick-couple Nozzle is made of hardened stainless steel and mounted for ready access. 36 ft. of high-grade Electrical Cord with Ground Fault Circuit Interrupter on all models for operator safety. Insulated, fatigue-free Trigger Gun with dual-lance Variable Pressure Wand provide remote change from low-pressure application of soap to high-pressure rinse.* 50 ft. of steel-wire braid High Pressure Hose with guard for burst protection.* Optional, E-Zee Hose Reel and Lifting Bracket with compact, easy-wind design for tangle-free handling of hose. High-heat aluminized steel inner wrap surrounds cold-rolled Heating Coil made of Schedule 80 steel pipe with five-year warranty. Two-ply, tubed Pneumatic Tires make for easy maneuvering in any terrain; safety brake prevents rolling. Optional rust-free Float Tank with stainless steel inlet filter, backflow protection and inlet detergent metering valve. Stainless Steel Top Wrap has unique design that allows access to the coil within minutes by simply removing six bolts.* Two-ply, tubed Pneumatic Tires make for easy maneuvering in any terrain; safety brake prevents rolling. Optional rust-free Float Tank with stainless steel inlet filter, backflow protection and inlet detergent metering valve. Helpful Graphics and Tri-Lingual Labels with operating instructions in English, Spanish and French for added liability protection and operator convenience. Adjustable Thermostat for precise temperature control. * Removable Panels allow for easy access and servicing of pump, motor and unloader. Conveniently located Control Panel with 3-position or rocker switch is housed in a water-resistant electrical enclosure. Easy-to-attach Downstream Detergent Injector for application of soap. Many Safety Features, including a rupture disk and thermal pump protector to prevent the build up of excessive pressures or heat. *HOT2-11026D and HOT2-15026D have axial pump with 1-year warranty, yellow painted mild-steel top coil wrap, and 30 ft. high pressure hose with straight-through insulated wand. HOT3-30036D Steamer has high limit switch, axial pump with 1-year warranty, and 50 ft. steam hose and wand. Specifications options & Accessories Part # Description 8.917-506.0 Float Tank & Inlet Detergent Metering Valve 8.917-541.0 Lifting Bracket/Hose Reel Platform with E-Zee Reel & Plumbing (holds 100' of 3/8" hose, not included)** 8.917-522.0 Lifting Bracket/Hose Reel Platform Only** 8.750-487.0 100' Landa Pivot Reel 8.750-477.0 100' Landa Non-Pivot Reel 8.917-525.0 Caster Wheel Kit 9.802-283.0 Hour Meter (machine pre-wired for easy installation)

Karcher ECOS Mobile Wash and Reclaim System is a new, revolutionary mobile hot-water pressure washing system with integrated wash water recovery and filtration. With this innovative pressure washer, water can be recycled and reused to reduce fresh water usage. From Nebraska's Jantzen Equipment. The patent-pending ECOS Mobile Wash and Reclaim System is a new, revolutionary mobile hot-water pressure washing system with integrated wash water recovery and filtration. With this innovative pressure washer, water can be recycled and reused to reduce fresh water usage. The ECOS also enables operators to comply with environmental regulations in jurisdictions that restrict wash water runoff from entering and soiling the environment. call for ordering & info Features One of the most exciting features of the ECOS is its use of patented Trans-Heat Technology, a creative process whereby heat from engine exhaust is captured in order to preheat inlet water by up to 15°F. The result is improved burner efficiency, fewer emissions, lower fuel costs, and a faster return on an owner’s investment. This ground-breaking hot-water pressure washer is powered by an industrial grade Honda GX660 gasoline engine and a LANDA LT pump to deliver cleaning power up to 3,500 PSI at a rate of 4.7 GPM. The ECOS is ideal for cleaning outdoors with hot water and is designed to appeal to a wide range of users including contract cleaners, municipalities, ports, building service contractors, fleet maintenance contractors, construction contractors, rental contractors, and state and federal government. Best of all, the fully self-contained mobile ECOS can go almost anywhere. Feature Rich The ECOS comes with a multi-stage filtering system, a two-inch vacuum hose, and a suction head for water reclamation. Two hose reels are included, along with 50-foot high-pressure LANDA Tuff-Skin™ hose, and a variable pressure wand. The chassis features a large, open galley for hauling and storing equipment, along with lockable secured storage and fuel access area. ECOS operators will appreciate the ease of use and ease of transporting this useful mobile wash trailer. Built to Last Four durable polyethylene tanks hold up to 400 total gallons of water. The main frame is composed of a 2” x 3” tube steel frame and formed channel protected by a weather-resistant polyester powder coating. The ECOS features a top-of-the-line, oil-bath, tri-plunger, belt-driven LANDA LT pump with 7-year warranty. It also features a high-quality, electric-start Honda engine and a heavy-duty 4,000 watt generator mounted on a vibration isolated 10-gauge steel power platform. The horizontal heating coil is made of durable half-inch schedule 80 cold rolled pipe. The ECOS is assembled using high-quality components. Easy to Service The ECOS was engineered with the service tech in mind, providing open access to components for maintenance or service. The ECOS features a conveniently placed control panel, burner, generator, and battery. All components are composed of high quality fittings that are easy to connect and disconnect including the protective front panels. The accessibility of ECOS’ components makes this an easy-to service unit. What does it clean? The ECOS is ideal for cleaning outdoors with hot water, such as: • Front-end loaders • Forklifts • Dump trucks • Graders and dozers • Farm equipment • Tractors and trailers • Buses, trains and planes • Walls, floors and ceilings • Machinery and equipment • Drills and pipelines • Street maintenance equipment • Rental equipment • Marinas and dry docked boats • Trash bins • Tanks, cages and pens • Sidewalks, parking lots and around buildings Recovery & Filtration System Feature: The integrated water reclaim and filter system recovers wash water utilizing a 120-volt vacuum turbine producing 105 CFM. A 12- volt transfer pump moves the water through a multi-stage filtration system that consists of a 50-mesh/100-micron pre-filter sock, a 20-micron pleated polyester cartridge filter, 5-micron carbon filter, and an oil absorbent media sock. Treated water can be recycled through the water storage tanks for re-use or discharged to an approved drain. Consult your local EPA for discharge limitations. Benefit: LANDA’s ECOS Mobile Wash and Reclaim System recovers, cleans and recycles dirty water from pressure washing for safe disposal or reuse to meet most municipal and environmental regulations. recovery & filtration system ECOS Features Trans-Heat Technology Feature: Patented Trans-Heat Technology by LANDA. Inlet water, typically around 60°F starting in the tanks, is directed to the feed pump and received by the Trans-Heat Technology heat exchanger. The heated exhaust gases from the engine are captured and diverted through a heat exchanger, preheating inlet water by up to a 15°F temperature rise. From the heat exchanger, water is routed to the LANDA high-pressure pump and heating coil resulting in up to a 140°F temperature rise. Hot water is then released through the high-pressure hose reel, wand, and gun. Benefit: By preheating inlet water before it reaches the main heating coil, the engine and burners do not have to work as hard, resulting in less wear and tear on the unit. This efficient method of heating water translates to fewer emissions, greater fuel savings, and greater profitability. trans-heat technology 2 Inch Vacuum Hose Feature: The ECOS comes with a 50-foot, 2-inch vacuum hose and fits well within the lockable storage area along with the vacuum head, extra parts, spare filters, and other accessories. Benefit: Vacuum hose storage ensures a neat and tidy galley, ample room to move around with room to spare! Additionally, having secured storage for spare filters ensures that the operator never runs out of supplies in the middle of a job. two inch vacuum hose Control Panel Feature: All system controls are conveniently placed curbside. They mounted control panel with protective and lockable cover includes a key start, choke, burner switch, adjustable thermostat, and an hour meter. Benefit: Electrical controls are mounted on the side for quick access, and housed in a water resistant box to protect from moisture. The adjustable thermostat allows for altering the water temperature to match the operator’s application. The hour meter displays the engine running hours so that regular preventative maintenance can be performed ensuring peak performance. control panel Control Valves Feature: Tank and bypass water control valves are conveniently located in the lockable control panel cabinet on the curbside of the unit. Bypass water can be directed to either the inner or outer set of tanks. Operators can easily transport 400 gallons of water in a tandem cabinet, or they can isolate fresh water from treated water by setting the supply tank valves to separate into two 200-gallon tanks. For service and reliability, all fittings are brass or treated steel, and they feature JIC-style fittings at connection points. Benefit: Easy-to-use labeling takes the guesswork out of water flow providing peace of mind for the owner and operator. Quality JIC-style fittings, including zinc-coated steel, are easy to connect and disconnect, provide rust protection, and are rated for withstanding high pressures. control valves Adjustable Thermostat Feature: The thermostat regulates the water temperature of the unit. The ECOS includes an adjustable thermostat conveniently located in the side lockable steel control panel. Benefit: The easily accessible thermostat, adjustable up to 200°F, allows the operator to match the temperature to the job and prevent overheating. adjustable thermostat Tuff Skin Hose Feature: This 50-foot long, half-inch double steel braid LANDA Tuff- Skin hose is the toughest high-pressure hose in the industry. When tested at 6945/DIN20024, the Tuff-Skin has proven to be seven times more abrasion resistant than standard pressure washer hoses, yet it is 20 percent more flexible. The Tuff-Skin Hose has a unique braid design and has been engineered for a greater continuous temperature range: from 40° to 275°F/310°F intermittently. It can handle pressures of up to 5,800 PSI, has a maximum strength Class A ORS (Oil Resistance Standard) cover, and features a bite-the-wire coupler that grips the hose better than any other design. Benefit: Due to its abrasion resistance and flexibility, the Tuff-Skin Hose holds up better than any other hose in outdoor pressure washer environments where hose typically gets whipped, twisted and yanked around. The maximum strength Class A cover rating means it will hold up to oils, grease and fats much better than the more commonly used Class B. The 50-foot hose gives the operator some slack to clean freely with out feeling encumbered by the pressure washer. tuff skin hose High Pressure Nozzles Feature: Nozzles are what create the pressure or cleaning power of the pressure washer. Four color-coded, hardened stainless steel, high-pressure nozzles are mounted in the rear adjacent to the high-pressure hose reels. Nozzles attach to the end of the wand with a quick coupler. The colors designate the spray patterns created by each nozzle: Red=0°, Yellow=15°, Green=25°, and White=40°. Benefit: The hardened stainless steel ensures the nozzles will hold up well without rusting or disintegrating during months of regular operation. The quick-couple makes switching nozzles quick and easy without the need of additional tools. The distinct colors allow the operator to quickly identify the flow patterns available. Having a variety of flow patterns, from the narrow 0° stream to the broad 40° spray, gives the operator plenty of options to meet whatever cleaning task is at hand. high pressure nozzels Variable Pressure Wand Feature: The variable pressure wand is 41 inches long and consists of two adjoined, insulated, zinc-coated metal tubes. An easy-grip handle on the side of the wand twists to increase or decrease the pressure. When the wand is set to high pressure, water is forced through the main pipe and out through the quick-coupled nozzle at the end of the wand. When it is set to low pressure, water is diverted to the second pipe to reduce the flow volume in the main pipe, thus reducing the pressure of the main water stream. A durable, plastic hood or nozzle covering is mounted at the end of the wand. Benefit: Having an easy way to manage the spray volume at the point of the wand makes the job easier for the operator. It also allows for better control when dispersing detergent when a downstream detergent injector is attached. The wand handle is turned to create a low-pressure flow, which immediately begins drawing in detergent into the spray. With the twist of the handle, clean water comes out again as a high-pressure spray. The wand length prevents an operator from spraying him/herself. The easy-grip handle is mounted at the right angle for hours of fatigue-free spraying. The plastic hood at the tip helps protect the nozzle and objects being cleaned. variable prssure wand Secure Storage Feature: The ECOS contains a steel storage compartment on the driver side, which can hold two 5 gallon buckets nestled on top of the two 17-gallon fuel tanks. Another storage compartment on the passenger side can hold small items such as a small toolbox, electrical cords, or cleaning supplies Benefit: This compartment helps to keep fuel and storage buckets secure and tucked out of the way. secure stoarge The Open Galley Feature: An 84-inch long by 30-inch open galley creates accessibility to tanks, storage spaces, and pressure washer. Benefit: The open galley allows an operator to haul and store additional tools and supplies, enabling the ECOS to be a more sufficient trailer. Moreover, the rear gate with detachable lock pin provides some security for tools and equipment stored in the galley. the open galley

FREE SHIPPING NATIONWIDE. Take control of your grain with the only programmed aeration system that gives you the power to be proactive in protecting your bins. Jantzen Equipment. Farmers. Family Owned. Sentry Pac from TGM. SENTRY PAC THE POWER to protect your grain FREE SHIPPING NATIONWIDE take control of your grain with the only programmed aeration system that gives you the power to be proactive in protecting your bins. Sentry Pac • Prevent spoilage • Finish drying • Ability to rewet • Stop over dry bottoms • Control energy use/costs • Save trips to remote sites • Remove guesswork from aeration • No expensive, troublesome cables • No programming required • Adapts to the weather for you • Unsurpassed life time Purchase now MORE VIDEOS THE TECHNOLOGY The SentryPac does not wait for grain to start to go out of condition and then run fans. Instead, the PAC monitors the weather - not the grain - to select precise conditions of temperature and humidity to produce your desired result in the grain. Over time the grain equalizes to these conditions and becomes uniform in both temperature and moisture content. PREVENTATIVE GRADUALISM (no large fronts) This 21 day average assures the air will be very close to the last time the fans ran so no big fronts are introduced. Big fronts can cause problems, including condensation. This also keeps the total hours of run time lower because never do fans have to be run to undo hours of operation out of range. Average minor differences (ranges) of temperature and RH over short periods of time works well and is a friend to good grain storage. This promotes uniformity. The PAC also avoids running with large differences over long periods of time which is disastrous due to the relationships between temperature, RH, and the grain mass and the very large energy exchanges involved. Fronts can be set up that are counter productive to desired results. ADAPTIVE When the outside temperature is within range of the 21 day average temperature the PAC calculates the needed RH% and activities the fans if in range. This decision is repeated every 15 minutes. For instance, if 60 hours per month were necessary for a certain bin situation, the budgeted time would be set for 2 hours per day (60/30 days_ and 2 hours would be added to the backlog each midnight. The ranges around the targeted temperature and the TMC expand and contract according to the size of the backlog to make runtime more or less likely to accommodate the variability of the weather. During the following months the PAC will select the best 8.33% (60/720 hours per month) of the weather available. The largest cause of spoilage in grain storage is moisture migration. This occurs when the grain temperature is different from the average outside temperature. Keeping grain near the average outside temperature prevents moisture migration. The TGM System™ delivers Networked Grain Aeration™ to save time, reduce energy inputs, speed up harvests, prevent spoilage and achieve a Targeted MC that is constant, not fluctuating, throughout a bin. The result – higher bin yields and more profit. Purchase a Sentry PAC

Find the pressure washer that works for you, your needs and your budget! With over 100 different options, we surely have one for you at Jantzen Equipment! coming soon! contact us in the meantime: dave@jantzenequipment.com 308.326.4239

Sentry PAC Dealer. Learn Where To Buy Sentry PAC, Video Tutorials. Installing the Sentry PAC, Programming the system, The Options and Modes. FREE SHIPPING NATIONWIDE. Take control of your grain with the only programmed aeration system that gives you the power to be proactive in protecting your bins. Jantzen Equipment. Farmers. Family Owned. Sentry Pac from TGM. Prevent grain bin spoilage. Control moisture content. Expect results. videos & tutorials Installation, Programming and More Installation Programming Modes Options & Reset Promo Video The Sentry PAC: the only preventative grain storage system on the market that gives YOU the power to protect your bins. You work hard all year for your harvest. Don't lose it once it's in the bin. 1VideoPage: Intro IntRo to Sentry PAC The Sentry PAC is a grain aeration system controller that is PROACTIVE in keeping your grain in condition by sampling the temperature and humidity every 15 minutes. It creates a 21 day average and runs your fans at wider/narrow parameters based on your target moisture... Read Full Article 2SP Video Page: Installation Installation How to install the Sentry PAC system is very simple. Mount the PAC inside or outside and mount the sensor outside, preferably under a cover to protect from elements that could cause inaccurate environmental readings... Read Full Article 3SentryPAC Video Tutorials: Programing Programming After installing the Sentry PAC, you will want to program it to your preferred grain condition so that it will do the work of keeping your grain in condition for you. Follow these four simple steps to program your machine.. Read Full Article 4SentryPAC Video Tutorals: Modes Modes Explained The Modes of the Sentry PA allow you to set the storage function based on your location's environment. Here you will set you drying and rewetting functions to keep your grain in perfect condition year round... Read Full Article 5SentryPAC Video Tutorial OPtions Options Explained & How to REset The options button allows you to set your backlog on your PAC, reset your Sentry PAC to it's factory defaults and much more. We are happy to walk you through the process of setting any options features you may need... Read Full Article

Prevent grain bin spoilage. Control moisture content. Expect results. Save money with Sentry Pac from Jantzen Equipment. We Ship! grain storage. built to last. quality. built to last. that's why we sell conrad american. download our informational flyer

Why waste time cleaning parts manually?  With a Cuda parts washer, you simply load the dirty parts, close the door and push start. It’s that simple! PARTS WASHERS We specialize in parts washers and accessories that effectively clean components made of metal, plastic, and even rubber. These systems are capable of handling small parts and large assemblies. They are limited only by the cabinet size, and they are especially effective in removing petroleum products, dirt carbon, and metal shavings. Count on us to be the innovators in parts washers. Our products offer top performance as well as more standard features and options than with any other brand in the industry. WHY cuda? Proven Quality The Cuda line of automatic aqueous parts washers has provided a safe and time-saving cleaning solution for thousands of repair shops and other businesses for over 15 years. Eliminates Harsh Solvents Cuda automatic parts washers eliminate the use of hazardous solvent cleaners providing a safe and easy solution to washing parts. Reduce Manual Labor, Saving Money and Time Why waste time cleaning parts manually? With a Cuda parts washer, you simply load the dirty parts, close the door and push start. It’s that simple! A single Cuda automatic parts washer can typically support three to four technicians or mechanics, who would otherwise spend hours washing parts by hand. Cuda allows them to focus on more revenue-producing work, which means your Cuda parts washer could pay for itself in less than one year. top seller: SJ15 Patented spray wash technology , which eliminates the need for drive motor, gears, pulleys, etc. Using a water-propelled spray arm with 23 nozzles that spins around a stationary parts basket, parts are hit from every angle and are never more than 18 inches from the spray nozzle, creating a surround cleaning effect. A momentary safety switch automatically turns off pump when lid is opened to protect operator from hot-water spray. Download Brochure Top Load Automatic Parts Washers Control Panel • For heater, wash cycle and low water shut-off Removable Debris Screen • Filters debris particles from wash solution • Safeguard against small parts that might accidentally be washed through from the cleaning chamber Automatic Oil Skimmer • Stainless steel disc and wiper blades • Removes oil and grease from cleaning solution Easy Access Sump Cover • Permits quick and easy cleaning Working Height : 12”-24” Turntable Diameter: 24”-25” Load Capacity: 250-500lbs. Pump Capacity: 20-50GPM; 22-45PSI 4 models/multiple options Cuda Detergents add 90 days to the machine warranty! BUY NOW find your perfect washer Front Load Automatic Parts Washers Space Saver Roll-In Door • Allows easy access to the entire wash chamber Integrated Oil Skimmer • Stainless steel disc and wiper blades • Removes oil and grease from the cleaning solution Front Access Debris Screen • Filters debris particles from the wash solution • Safeguard against small parts that might accidentally be washed through from the cleaning chamber Optional Pneumatic Power Brush • Rotates at 1800 rpm • Stainless steel bristles Working Height: 30”-72” Turntable Diameter: 25”-72” Load Capacity: 500-1,000lbs. Pump Capacity: 50-180GPM; 40-45PSI 7 models/multiple options Cuda Detergents add 90 days to the machine warranty! BUY NOW find your perfect washer

Jantzen Equipment. Farmers. Family Owned. Making Your Operation Stronger. Pressure Washers. Tire Fill. Grain Storage Solutions. Pivot Track Reducer Track Log Right here in Nebraska. More.. FLOOR CARE As fourth generation farmers, we know how valuable it is to find reliable equipment for every day use. The brands of equipment we carry will make your life easier, increase your productivity and save you money. Sweepers scrubbers Services WHO WE ARE Jantzen Equipment is a family owned business located near Madrid in south west Nebraska. We started in the mid seventies selling steam cleaners. Being a forward thinking farming operation, we searched out and tested many commercial quality goods. This has given us the ability to choose the best for our customers. Today, we specialize in a variety of products for Farm, Home, and Industry. These include; hot, high pressure cleaning equipment, automatic parts washers, grain aeration controllers, bin equipment, tire fill, commercial mowers, and more. Of course, service is key to any successful endeavor, and it is a crucial part of our business as we have customer support by phone, service trucks to come to your location, and two, full-service centers located in Madrid and North Platte, Nebraska.

As farmers, we here at Jantzen Equipment know that summer time means two things: stuck pivots and gearboxes going out. TrackLog, Sprinkler Lube are here for you Sprinkler Lube REDUCE GEARBOX FAILURE SPRINKLER LUBE TRACK LOG SOIL PAM

Find the pressure washer that works for you, your needs and your budget! With over 100 different options, we surely have one for you at Jantzen Equipment! find your perfect washer With over 100 options to choose from, we want to outfit you with the perfect pressure washer to fit your needs and budget. First Name Last Name Email Phone Location next: select your washer needs

Jantzen Equipment Company located in NE is ready to serve you in all of your pressure washer needs. From professional cleaning equipment to industrial and agricultural equipment, we have you covered. online returns -Item(s) must be returned within 30 Days of Shipping Date -Refund to original from of payment (minus S&H and cc fees) - Customer pays S&H and Credit Card Fees -Product must be in perfect new condition -Fill out online form to request return First Name Last Name Email Order Info + Return Reason Submit Thanks for submitting!

Jantzen Equipment, your Landa pressure washer dealer for 40 years. Compact, Natural Gas or LP-Heated, Hot Water Pressure Washer LANDA ENG Compact, Natural Gas or LP-Heated, Hot Water Pressure Washer The ENG, with its fuel-efficient burner and vertical hot water coil, is the most compact natural gas hot water pressure washer on the market today. Compact: The ENG is only 49-inches long, 24-inches wide, and stands 48 inches high – an amazingly small footprint for all of the features and quality it possesses. For cleaning applications that require more water flow, larger ENG units are available. Innovation: Landa’s patented Cool-Bypass* system keeps water temperature low while in bypass, extending the life of the pump. Landa’s new Tru-Tite belt tensioning system uses a spring-loaded idler arm to keep the belt aligned and tensioned, and it creates less wear and tear on the belt. The new Fielder’s Choice system allows the user to move the inlet/outlet connections from one side to the other, making installation easier than ever before. Quality: The ENG boasts many of the industrial-grade components and safety features that have set apart Landa pressure washers as the most dependable and safe in the industry. For instance, the ENG burner comes with standard electronic ignition on all models. The heat is retained in Landa’s carefully crafted heating coils made of leak-free, cold-rolled, 1/2-inch Schedule 80 steel pipe. Up to 9.5 GPM; Up to 3200 PSI Rugged Belt-Driven Landa Pump with 7-Year Warranty Remote Options Electronic Ignition Natural Gas and LP Models Industrial-grade, belt-driven High-Pressure Landa Pump has a triplex, forged brass head with a 7-year limited warranty and U-seals for greater pump protection. Many Safety Features, including a rupture disk to prevent the build-up of excessive pressures or heat. High-efficiency Burner has Electronic Ignition standard on all models, eliminating the hassle of having to constantly light the pilot flame. Innovative swing-out cast iron Burner Ring makes serviceability easier. Rust-free, polyethylene Float Tank with stainless steel inlet filter and low-turbulence diaphragm float valve allows for high pressure application of detergent. During installation, Fielder's Choice allows inlet and outlet connections to be located on either end or rear of the machine. Extra-durable Heating Coil made of leak-free, cold-rolled, Schedule 80 steel pipe with 5-year warranty. Removable Panels with EZ Loc fasteners allow easy access to components for repair or replacement. Cast-iron, bushed-bore Pulleys mean long life and easy maintenance on the high-pressure pump. Top-of-the-line Tuff-Skin Hose, with 24-inch hose guard for burst protection and swivel swedge fitting for twist-free operation; offers seven times the abrasion resistance as other high-pressure hoses. Rugged Steel Frame painted with a polyester powder-coat finish for all-weather protection. Insulated, fatigue-free Trigger Gun with stainless steel Insulated Wand make for effective point-and-shoot cleaning action. Overload protected Lighted Control Switches are conveniently located for ease of operation. Helpful Trilingual Labels with operating instructions in English, Spanish, and French for owner and operator protection. Three quick-couple Nozzles are made of hardened stainless steel and mounted for ready access. Tru-Tite belt tensioning system uses an idler arm to keep the belt in-line, tensioned, and it extends the life of the belt. Brass, anti-syphon Detergent Metering Valve locks out air and dispenses precise amount of cleaning agent. Landa's patented Cool-Bypass* system keeps pump water temperature low while in bypass. Industrial-duty Electric Motor with multiple voltage options and thermal overload protection. Optional LanCom Wireless Remote controls the pump, burner and detergent up to 300 feet away line of sight. specifications options Part No. Description 8.917-509.0 Snap-N-Go LanCom Wireless Remote Control Kit 8.917-817.0 LanCom Wireless Remote Wall Mount Bracket 8.921-832.0 Additional LanCom Wireless Remote 8.921-774.0 Wired Remote Control Kit for Pump & Burner 8.921-773.0 Wired Remote Control Kit for Detergent (requires 8.921-774.0) 8.922-157.0 Remote Control Box (Wired) 8.917-507.0 Snap-N-Go Auto Start/Stop Kit 8.917-508.0 Snap-N-Go Time Delay Kit 8.921-776.0 Steam Combo Kit 9.801-040.0 Draft Diverter 10" 8.753-474.0 Draft Damper 10" 8.717-730.0 Draft Diverter 12" 8.753-478.0 Draft Damper 12" 8.753-706.0 Reducer, Stack 12" to 10" 8.753-707.0 Reducer, Stack 10" to 8"